Quidway NetEngine80
Configuration Guide - Basic Configurations 11 System Software Upgrade
Issue 04 (2009-12-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
11-7
The patch status of the board after the next startup is specified as Run.
----End
11.3.5 Checking the Configuration
Run the following commands to check the previous configuration.
Action Command
Display the information of startup system software.
display startup
Running the display startup command, you can learn that the system software in the next
startup of the router is the system software specified in the upgrading operation. The system
software is the same for the master and slave MPU s.
<Quidway> display startup
MainBoard:
Configed startup system software: hd:/V300R005C01B323SPC001.bin
Startup system software: hd:/V300R005C01B323SPC001.bin
Next startup system software: hd:/V300R005C01B323SPC001.bin
Startup saved-configuration file: flash:/vrpcfg.zip
Next startup saved-configuration file: flash:/vrpcfg.zip
Startup paf file: flash:/paf_v300r005c01.txt
Next startup paf file: flash:/paf_v300r005c01.txt
Startup license file: flash:/license_v300r005c01.txt
Next startup license file: flash:/license_v300r005c01.txt
Startup patch package: NULL
Next startup patch package: NULL
SlaveBoard:
Configed startup system software: hd:/V300R005C01B323SPC001.bin
Startup system software: hd:/V300R005C01B323SPC001.bin
Next startup system software: hd:/V300R005C01B323SPC001.bin
Startup saved-configuration file: flash:/vrpcfg.zip
Next startup saved-configuration file: flash:/vrpcfg.zip
Startup paf file: flash:/paf_v300r005c01.txt
Next startup paf file: flash:/paf_v300r005c01.txt
Startup license file: flash:/license_v300r005c01.txt
Next startup license file: flash:/license_v300r005c01.txt
Startup patch package: NULL
Next startup patch package: NULL
To Next Page
Loading...
