Huawei V300R005 - Configuration Procedure; Figure 2-2 New Connection; Figure 2-3 Setting the Port

2 Establishment of the Configuration Environment
Quidway NetEngine80
Configuration Guide - Basic Configurations
2-8 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 04 (2009-12-20)
Configuration Procedure
Step 1 Connect the serial port of the PC (or terminal) to the console port of the router through
standard RS-232 configuration cable. The local configuration environment is established.
Step 2 Run the terminal emulation program on the PC. Set the terminal communication parameters to
be 9600 bps, data bit to be 8, stop bit to be 1. Specify no parity and no flow control as shown
from Figure 2-2 to Figure 2-4.
Figure 2-2 New connection
Figure 2-3 Setting the port