Appendix B • Home Networking
98
1037073-0001 Revision E
cable in case you have to repair it, which usually involves cutting
away a damaged section.
Prepared Ethernet cable, cable that already has RJ-45 jacks
installed at the ends, is usually available in lengths of no more
than 50 ft. If the cable length exceeds 50 ft, use a kit to install the
RG-45 jacks at both ends of the cable. (This is called terminating
the cable.) The kits are available at some electronic supply or
home supply stores. If you do not feel comfortable installing
Ethernet cable yourself, contact a professional installer.
To Next Page
Loading...
Need help?
General