Hughes HN7000S User Manual

Appendix A • Typical Operating System Settings
70
1037073-0001 Revision E
the terminal for the Default Gateway. Enter 66.82.4.8 in
the Preferred DNS server field. See Figure 49.
7. Select OK to close the open dialog boxes and finish the
configuration.
8. Restart the computer even if Windows does not prompt you
to do so. This ensures the network settings are automatically
reset.
Windows XP
1. Open the Control Panel by selecting Start→ Settings→
Control Panel and double-click the Network and Dial-up
Connections
icon. See Figure 50.
Figure 49: Entering the preferred DNS server address
Note: If the Control Panel is in category view, select
Network and Internet Connections then select Network
Connections.

Hughes HN7000S Specifications

General

Brand	Hughes
Model	HN7000S
Category	Touch terminals
Language	English