Appendix C • Conformance with standards and directives
1037073-0001 Revision E
101
Electromagnetic
compatibility (EMI)
This product conforms to EMI standards of the U.S. FCC,
Canadian CSA, and European Union (EU), as detailed in the
following sections. The installation and maintenance procedures
in the installation and configuration guide must be followed to
ensure compliance with these standards.
FCC Part 15
This section applies to the HN7000S and HN7700S remote
terminals.
Standards to which Conformity is declared: FCC Part 15
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device
must accept any interference received, including interference
that may cause undesired operation.
Responsible Party’s name: Hughes Network Systems, LLC
Address: 11717 Exploration Lane, Germantown, MD 20876
Telephone: 1-866-347-3292
Trade Name: HUGHES
Type of Equipment: Two-Way Hughes System
Model Numbers:
HN7000S (1500097-xxxx and 1036599-xxxx)
HN7700S (1500139-xxxx)
The Two-Way Hughes System (HN7000S and HN7700S)
complies with the Canadian ICES-003, Class B standard.
CAUTION
This is a class B product. In a domestic environment this
product may cause radio interference in which case the
user may be required to take adequate measures.
To Next Page
Loading...
Need help?
General