Chapter 3 • HughesNet Tools
34
1037073-0001 Revision E
If you do not see HughesNet Tools on the Start menu, you can
install the tools on your computer in one of two ways:
• Using the HughesNet Tools CD for the first computer to be
connected to the terminal.
• For subsequent computers connected to the terminal via a
LAN, download the HughesNet Tools software from
customercare.myhughesnet.com
Installing the HughesNet
Tools using the CD
1. Insert the HughesNet Activation Software compact disc (CD)
that came in the box with your terminal in the computer’s CD
drive.
2. Follow the on-screen instructions.
The CD automatically installs HughesNet Tools.
Installing HughesNet Tools
by downloading software
from the Hughes site
1. Launch Internet Explorer, and go to
customercare.myhughesnet.com
2. Under HughesNet Tools and Security, click
Introduction to HughesNet Tools
3. Click For information on downloading from the Internet,
Click Here
.
4. Follow the instructions in the topic How to Download
HughesNet Tools from the Customer Care Web Page click
here
Launching HughesNet
Tools
There are three ways you can launch HughesNet Tools:
• On the Windows Start menu, click
Start → All Programs → HughesNet Tools
• Double-click the HughesNet Tools shortcut (Figure 28)
Figure 28: Shortcut to HughesNet Tools
To Next Page
Loading...
Need help?
General