Chapter 2 • System Control Center
1037073-0001 Revision E
25
Configuration. Each section displays a number of fields. While all
of the information displayed in the fields may be useful at some
time, a discussion of the most important fields follows.
•
HN7000S Info section
–Site ID – Identifies your site.
–
Serial number – The terminal’s serial number. The
terminal’s serial number may be required to troubleshoot.
–
Software Date – Software build date.
–
Software Release – Version of the software on the remote
terminal. This is typically the factory-installed software
version. However, if the NOC downloads a newer version
of the software to the remote terminal, the newer version is
displayed.
–
LAN1 IP Address – The address of the remote terminal.
Figure 20: System Information page
Note: Print the System Information page and save it. The System
Information page may not be accessible if a problem occurs. If you
call Your service provider for assistance, you will need the Site ID,
serial number, and software release.
To Next Page
Loading...
Need help?
General