Hughes HN7000S User Manual

Appendix A • Typical Operating System Settings
1037073-0001 Revision E
75
4. Ensure the Client for Microsoft Networks and Internet
Protocol (TCP/IP) are installed and checked. If NetBEUI is
installed, uninstall it.
5. Select Internet Protocol (TCP/IP) being careful not to
uncheck it, and then select Properties. See Figure 56.
6. In the General tab, select Use the following IP address. Enter
an appropriate IP Address from the range of available IP
addresses.
7. Enter
255.255.255.0 for the subnet mask.
8. Enter the terminal IP address as the Default Gateway.
Figure 56: Local Area Connection Properties

Hughes HN7000S Specifications

General

Brand	Hughes
Model	HN7000S
Category	Touch terminals
Language	English