Chapter 2 • System Control Center
30
1037073-0001 Revision E
See Chapter 5 – Troubleshooting on page 41 for instructions
explaining how to access and perform the test.
Port Forwarding
Configuration page
The Port Forwarding Configuration Page (Figure 25) is available
only on the HN7700S terminal and is present only if Port
Forwarding has been enabled and made visible on your terminal
by the NOC.
This page allows you to define rules for allowing TCP and User
Datagram Protocol (UDP) traffic on the Internet to access servers
on your network.
Note: This feature is not available for the HN7000S terminal.
Figure 25: Port Forwarding Configuration page
To Next Page
Loading...
Need help?
General