IAI MCON-C - Page 172

162
• Driver Shutdown Release Delay Time
It is used in purpose to scatter the in-rush current when the power is supplied to multiple
controllers from one power source.
Utilize Driver Shutdown Release Delay Time [refer to 3.9.3 3) GW Parameter 3] in the gateway
parameter setting tool to shift the timing to turn the servo on so the occurrence of in-rush current
can be dispersed.
Utilize Driver Shutdown Release Delay Time [refer to 3.9.3 3) GW Parameter 3] to shift the timing
to turn the servo ON so the occurrence of in-rush current can be dispersed.
3.6 Power Supply