IAI MCON-C - Change History

Change History
467
Change History
Revision Date Revision Description
2015.09
2016.01
2016.04
2016.05
2016.06
2017.03
2018.07
2018.07
First Edition
1B Edition
• Revising of applicable teaching tools
• Revising of cable lengths
• Change made to selection method for pressing CON/SEP system
• Correction made to writing error
1C Edition
• Applicable for RCP6 and TB-02/TB02D (except for 10.4)
• Applicable connection cable model codes revised in 2.2 [2]
• Correction made to explanation for JOG speed in direct indication mode in
3.4.6, 3.7.1 and 8.2
• Parameter initial value revised in 8.1 and 8.2
• Correction made to explanation for Parameter No. 143 (Overload Level
Ratio) in 8.2 [57]
• Correction made to writing error
Second Edition
• Applicable for SSCNET
2B Edition
• Applicable for CE mark/UL standards
• Applicable for MECHATROLINK-Ⅲ
• “12. Motor Features in AUTO Mode” added in caution notes
• 1.1.1 Volume column added in 1.1.1 Components
• 10.4 Correction made to note regarding connection to RCP2-SA7C/SA7R
(connection not available)
• Correction made to writing error
Third Edition
• Applicable for EtherCat motion
• “Selecting Automatic Current Reduction Feature” added for Parameter
No. 182 in 6.2, 8.1 and 8.2 [74].
• Chapter 9 Alarm List 047, 0B4, 0BE and 0E8 added and fixed.
• Correction made to writing error.
3B Edition
• 10.4 List of Specifications of Connectable Actuators revised
• Correction made to writing error
Fourth Edition
• Applicable for CC-Link IE Field
• Applicable for TB-03