246
9) Diagnosis Information
The number of the communication error (ERRC and ERRT) occurrence and number of the
emergency stop (EMG) detection can be counted.
10) Alarm List
Click on the “Update” button and the alarm list is read again from MCON.
Click on the “Clear” button and the alarm list retained in MCON are all deleted.
Press “Save” button and the alarm list retained in MCON will be saved in CSV format.
Refer to Chapter 9 Troubleshooting for the details of the alarms.
3.9 About Gateway Parameter Setting Tool
To Next Page
Loading...
Need help?
General
