IBM Aptiva Series - Page 155

Modem response codes B-13
a. EC appears only when the Extended Result Codes configuration option (AT\V1) is enabled. EC is replaced by
one of the following symbols, depending on the error control method used:
787878
7878
"59"598"59
"598"598
5&5
0 Connect 52000 EC* Connected at 52000 EC bits / s, 56K rate
 Connect 54000 EC* Connected at 54000 EC bits / s, 56K rate
! Connect 56000 EC* Connected at 56000 EC bits / s, 56K rate
2 Connect 16800EC* Connected at 16800 bps
B Connect 115200EC* Connected at 115200 bps
 Delayed
 Blacklisted
0 Blacklist full
Table 13: Basic Response codes (Continued)
Digit code Word code Meaning
v65xahb.book : app-b.fm Page 13 Friday, January 16, 1998 4:27 PM