IBM RS/6000 7025 F50 Series

SSA (serial storage architecture)
(continued)
service aids (continued)
Configuration Verification 3-77
error codes 3-83
finding the physical location of a
device 3-90
Format Disk 3-79
identify function 3-65
Link Verification 3-73
Set Service Mode 3-67
starting 3-65
SSA Hot-Swap Disk Drive
vital product data (VPD) 3-93
SSA-address (AA) value 3-91
stand-alone diagnostics 4-1
start talk mode B-10
Start Up program 5-8
starting
MAPs 2-37
service aids 3-65
starting system programs 5-1, 5-24
STBY 2-1, 2-20, 2-21, 2-22, 2-23,
3-31, E-2
strings, disk drive module 3-60
surveillance
failure B-28
operating system B-28
set parameters B-11
system firmware B-28
Sys Config program 5-5
system administrator B-19
system card locations 1-6
system data flow 1-8
system information menu B-13
system phone number B-20
system POST errors
read B-5, B-14
system power-on methods B-25
system programs 5-1
Start Up 5-8
starting 5-1, 5-24
Sys Config 5-5
Utilities 5-10
system unit locations 1-1
T
table
service request numbers
(SRNs) A-6
tape drive
removal and replacement 6-19
test, memory 3-42
testing the setup
call-in C-2
call-out C-3
U
unattended start mode,
enable/disable B-12
unavailable service aids 3-90
Unplug all power cords (cables) 6-5
unrecoverable error 3-83
using
MAPs 2-35
service aids 3-65
SRN table A-3
Utilities program 5-10
V
value, port (P) 3-90
verification
configuration, service aid 3-77
link, service aid 3-73
serial number 3-80, 3-82
vital product data (VPD) 3-93
X-8 Service Guide