Ice vulcan - Page 134

6-20 Troubleshooting
Rev AA
ICE Vulcan Service Manual
E5028
PrintheadPositionTem-
peratureShutdown
‘Printhead Force
Fault’
- The printhead
force drive has a
fault. This may be
caused by a faulty
main circuit board.
• Power off the machine and replace the
main circuit board, then re-try.
• If the problem persists, please call your
local service representative. The machine
will not run until this fault is resolved.
Fault
Table 6-5: CLARiTY Error Messages (Continued)