Working with Master/Slave 8-22
ICE Vulcan Service Manual
If a Slave LPA enters a Fault state, the error is reported on the Master
LPA’s CLARiTY, as shown
in Figure 8-19 and Figure 8-20.
Figure 8-19: Fault State
Figure 8-20: Fault State - Details
In the example shown (Figure 8-19 and Figure 8-20), communication has
been lost between
the Master and Slave LPA.
This fault can be cleared, when the communications are re-established or
when the Slave LPA is
'unassigned'.
To Next Page
Loading...