Overall Equipment Effectiveness - Availability Tools E-7
ICE Vulcan Service Manual
The parameters page shows the equipment parameters for the time of the
event, 1 minute
before the event and 5 minutes before the event to fully
describe and facilitate a diagnosis of
the fault and equipment state, at and
just before the fault.
From this page, the event log can be selected that shows all alarms,
warnings and status
indicators of the equipment. Selecting event log from
this page will show the event log for the
event time.
Touch Go to Event Log to view Event log page (see Figure E-6: on page E-
7). You can also view
this page by navigating through Tools > Diagnostics >
Printhead.
The Event log retains all activities happening for a six month period. It can
be useful to check
other equipment activities occurring at the same time as
a fault to understand the fault
context.
You can filter to remove status, warnings, alarms as required.
Figure E-6: Event log
To Next Page
Loading...
Need help?
General