Icom IC-R30 - Page 107

6
MENU SCREEN
6-30
■ Bluetooth Set (Continued)
Pairing/Connect
[MENU] > Bluetooth Set > Pairing/Connect
Searches for the Bluetooth device to connect, or display the paired Bluetooth devices in
the list.
<<Pairing Reception>>
[MENU] > Bluetooth Set > <<Pairing Reception>>
Enters the Pairing Reception mode.
L If the Bluetooth function is OFF, a conrmation dialog is displayed. Select “YES” to turn ON
the Bluetooth and enter the Pairing Reception mode.
AF Output (Default: Headset Only)
[MENU] > Bluetooth Set > Headset Set > AF Output
Select the AF Output device when a Bluetooth headset is connected.
• Headset Only: Outputs audio to only the connected Bluetooth headset.
• Headset & Speaker: Outputs audio to both the connected Bluetooth headset and the
receiver’s speaker.
Power Save (Default: OFF)
[MENU] > Bluetooth Set > Headset Set > Icom Headset > Power Save
Select whether or not to operate with the Power Save mode while the optional VS-3
headset is connected.
L When a data device is connected, the Power Save mode is automatically turned OFF,
regardless of this setting.
• OFF: Turns OFF the function.
• ON: The Power Save mode is enabled when no communication or
operation is performed for 120 seconds.
Custom Key Beep (Default: OFF)
[MENU] > Bluetooth Set > Headset Set > Icom Headset > Custom Key Beep
Set the beep sound when the optional VS-3 headsetʼs Custom Key ([PTT]/[PLAY]/[FWD]/
[RWD]) is pushed.
• OFF: No beep sounds.
• ON: A beep sounds when you push a VS-3 headsetʼs key.