7
OTHER FUNCTIONS
7-33
■ CI-V information
D Command table (Continued)
Cmd. Sub cmd. Data Description
16* 60 00/01 Send/read the NXDN digital squelch (D.SQL) setting
(00=OFF, 01=RAN)
61 00/01 Send/read the DCR digital squelch (D.SQL) setting
(00=OFF, 01=UC)
62 00/01 Send/read the dPMR SCRAMBLER function status
(00=OFF, 01=ON)
63 00/01 Send/read the NXDN ENCRYPTION function status
(00=OFF, 01=ON)
64 00/01 Send/read the DCR ENCRYPTION function status
(00=OFF, 01=ON)
18 00 Turn OFF the receiver
01*
1
Turn ON the receiver (See page 7-35)
19 00 Read the receiver ID
1A* 00 00/01 Send/read the ANL (Automatic Noise Limiter) function
(00=OFF, 01=ON)
01 00/01 Send/read the Earphone mode
(00=OFF, 01=ON)
1B* 01 See p. 7-38 Send/read the TSQL tone frequency
02 See p. 7-38 Send/read the DTCS code
03 000 ~ FFF
See p. 7-38
Send/read the P25 NAC (First 4 bits in each byte are xed to “0.”)
07 00 ~ 99
See p. 7-39
Send/read the D-STAR CSQL code
08 001 ~ 255
See p. 7-39
Send/read the dPMR COM ID
09 00 ~ 63
See p. 7-39
Send/read the dPMR CC
0A 00 ~ 63
See p. 7-39
Send/read the NXDN RAN
0B 001 ~ 511
See p. 7-39
Send/read the DCR UC
0C 00001 ~ 32767
See p. 7-39
Send/read the dPMR scrambler key
0D 00001 ~ 32767
See p. 7-39
Send/read the NXDN encryption key
0E 00001 ~ 32767
See p. 7-39
Send/read the DCR encryption key
20 00 00* 00/01*
2
See p. 7-35
Send/read the D-STAR Call sign output setting
(00=Transceive OFF, 01=Transceive ON)
01 See p. 7-40 Output the D-STAR Call sign setting for transceive
02 See p. 7-40 Read the D-STAR Call sign contained in the received signal
01 00* 00/01*
2
See p. 7-35
Send/read the D-STAR message output setting
(00=Transceive OFF, 01=Transceive ON)
01 See p. 7-41 Output the D-STAR message for transceive
02 See p. 7-41 Read the D-STAR message contained in the received signal
02 00* 00/01*
2
See p. 7-35
Send/read the D-STAR RX status output setting
(00=Transceive OFF, 01=Transceive ON)
01 See p. 7-41 Output the D-STAR RX status for transceive
02 See p. 7-41 Read the D-STAR RX status
03 00* 00/01 Send/read the D-STAR RX GPS/D-PRS data output setting
(00=Transceive OFF, 01=Transceive ON)
01
See pp. 7-42
Output the D-STAR RX GPS/D-PRS data for transceive
02
See pp. 7-42
Read the D-STAR RX GPS/D-PRS data
*(Asterisk) Send/read data