7
OTHER FUNCTIONS
7-41
• D-STAR RX message
Command: 20 0101, 20 0102
@9 ~ #2@1 ~ @8q ~ @0
• • • • • •
X XX X
X XX X
• • •
X XX X
q
~
@0
: Message (20 characters)
@1
~
@8
: Call sign of the CALLER station (8 characters)
@9
~
#2
: Note of the CALLER station (4 characters)
L FF: No signal has been received since the power was turned ON.
CALLER: The call sign of the caller station.
CALLED: The call sign of the called station.
RXRPT1: The call sign of the repeater that was accessed by the caller station.
(FROM repeater)
RXRPT2: The call sign of the repeater you received the call from.
(TO repeater)
• D-STAR RX STATUS
Command: 20 0201, 20 0202
Data Function Description
bit7 0 (Fixed) —
bit6 0/1 Receiving a voice call While receiving a digital voice signal, “1” is returned.
(Regardless of DSQL and CSQL setting)
bit5 0/1 Last call finisher When the last call was finished by a user, “1” is returned.
bit4 0/1 Receiving a signal When the audio tone can be heard, “1” is returned.
bit3 0/1 Receiving a BK call While receiving a BK call, “1” is returned.
bit2 0/1 Receiving an EMR call While receiving an EMR call, “1” is returned.
bit1 0/1 Receiving a signal
other than D-STAR
While under an interference (Mode icon D-STAR and FM
alternately blink), “1” is returned.
bit0 0/1 Packet loss status While displaying a packet loss, “1” is returned.
■ CI-V information
D Commands (Continued)
To Next Page
Loading...
