Icom IC-R30 - Page 176

9
UPDATING THE FIRMWARE
9-7
■ Updating the rmware
5. Updating the rmware (Continued)
5. Select the Firmware (Example: R30EXXX.dat*).
• The nal conrmation dialog appears.
L Carefully read all precautions.
* X represents the release number.
6. After you read all the precautions,
select “YES.”
• The updating starts.
L If you want to cancel the updating, select “NO.”
L After the updating nishes, the IC-R30 will automatically restart.
TIP: To check the rmware version after the updating, see “Checking the rmware
version (p. 9-3)” for details.