Icom ID-4100A

9
MENU SCREEN
9-7
GPS Alarm
Alarm Select OFF, RX, Group, or Memory Select the target for the GPS alarm function.
Alarm Area (Group) 0.08’ ~ 0.25’ ~ 59.99’*
1
Enter the GPS alarm active range.
Alarm Area (RX/Memory) Limited, Extended, or Both Select the GPS alarm active range.
GPS Logger*
2
GPS Logger OFF or ON Turns the GPS Logger function ON or OFF, to
save your route as you move.
Record Interval 1sec, 5sec, 10sec, 30sec, or
60sec
Selects the GPS Logger function record
interval.
Record Sentence
✔
RMC/
✔
GGA/
✔
VTG/
✔
GSA
Selects the GPS Logger function record
sentences.
GPS Auto TX OFF, 5sec, 10sec, 30sec, 1min,
3min, 5min, 10min, or 30min
Selects a time option for the GPS automatic
transmission function.
Call Sign Set and display the DV mode call signs.
UR: CQCQCQ, R1: --------,
R2: --------, MY: --------
Displays the operating call signs.
Sets the operating call signs according to the
type of call you want to make.
RX History Displays the received call history in the DV mode.
RX01: Displays the calls your transceiver received.
DV Memory Saves call signs or repeater information to use in the DV mode.
Your Call Sign
Blank
Saves station call signs. Add or edit call signs.
Repeater List 01:~50: Saves repeater information.
Add or edit a repeater information.
NOTE: The repeater list described in this manual may differ from your preloaded list.
My Station Sets and saves MY call sign to use in the DV mode.
My Call Sign 1:~6: Saves MY call signs.
Select or edit a MY call sign to use in the DV
mode.
TX Message 1:~5: or OFF Saves TX Messages.
Select or edit TX Message to use in the DV
mode.
DV Set Sets values for the DV mode operations.
Tone Control
RX Bass Cut, Normal, or Boost Sets the DV mode received audio bass lter
level to Cut, Normal or Boost.
RX Treble Cut, Normal, or Boost Sets the DV mode received audio treble lter
level to Cut, Normal or Boost.
RX Bass Boost OFF or ON Turns the DV mode received audio Bass
Boost function ON or OFF
*
1
The unit may differ, depending on the “Display Unit” settings. (p. 9-64)
*
2
Be sure to insert the microSD card into the transceiver before selecting these items.
Menu items and Default settings (Continued)
NOTE: The default settings shown in bold letters below are for the USA version.
The default settings may differ, depending on your transceiver version.
Previous view