Icom ID-4100A

9
MENU SCREEN
9-11
Backlight Night Time Setting
Night Time Setting OFF or ON Selects whether or not to turn down the
backlight brightness for nighttime operation.
Brightness 1~2~4 Selects the backlight brightness level for
nighttime operation.
Night Time Start 0:00~18:00~23:59 Sets the start time for nighttime operation.
Night Time End 0:00~6:00~23:59 Sets the end time for nighttime operation.
Auto Dimmer Setting
Auto Dimmer OFF, Auto-OFF, or Auto 1~3 Sets the Auto Dimmer function for nighttime
operation.
Auto Dimmer Timer 5sec, 10sec Sets the period of time until the backlight turns
OFF when “Auto Dimmer” is set to “Auto-OFF”
or “Auto-1” to “Auto-3.”
Auto Dimmer Cancel (PTT) OFF or ON Select the transceiver operation when [PTT] is
pushed when the Auto Dimmer is activated.
Auto Dimmer Cancel
(DV RX)
OFF or ON Select the transceiver operation when
receiving a DV signal while the Auto Dimmer
is activated.
LCD Contrast 1~8~16 Sets the contrast level of the LCD.
RX Call Sign OFF, Normal, RX Hold, or Hold Selects the call sign and message display
option when receiving a call.
RX Position Indicator OFF or ON Selects whether or not to display the indicator
when the position data is included in the
signal received in the DV mode.
RX Position Display OFF or ON Selects whether or not to display the caller’s
position data in a dialog when the data is
included in the signal received in the DV
mode.
RX Position Display Timer 5sec, 10sec, 15sec, 30sec, or
Hold
Sets the RX position data display period of
time.
Reply Position Display OFF or ON Selects whether or not to display the caller’s
position data in a dialog when the data is
included in the Auto Reply signal.
TX Call Sign OFF, Your Call Sign, or
My Call Sign
Selects whether or not to display My or Your
call sign while transmitting.
Scroll Speed Slow or Fast Selects the scrolling speed of the message,
call sign, or other text.
Opening Message OFF or ON Selects whether or not to display the opening
message at power ON.
Voltage (Power ON) OFF or ON Selects whether or not to display the power
source voltage at power ON.
Menu items and Default settings (Continued)
NOTE: The default settings shown in bold letters below are for the USA version.
The default settings may differ, depending on your transceiver version.
*
The default value may differ, depending on the transceiver version.
Previous view