9
MENU SCREEN
9-58
• During RX/Standby:
●: Default setting : Available N/A: Not available
Function Description
Remote MIC Key
Up/Down MIC
Key
[F-1] [F-2] [UP] [DN]
--- No function
UP
Push to increase the frequency, Memory channel, repeater
or station call sign.
N/A N/A
●
DOWN
Push to decrease the frequency, Memory channel, repeater
or station call sign.
N/A N/A
●
VOL UP Push to increase the volume level. N/A N/A
VOL DOWN Push to decrease the volume level. N/A N/A
SQL UP Push to increase the squelch level. N/A N/A
SQL DOWN Push to decrease the squelch level. N/A N/A
Monitor Push to open or close the squelch.
●
CALL Push to select a call channel. N/A N/A
MR (000 CH) In the Memory mode, push to select Memory channel 000.
MR (001 CH) In the Memory mode, push to select Memory channel 001.
VFO/MR
Push to select between the VFO mode and the Memory
mode.
N/A N/A
DR Push to turn the DR function ON or OFF.
FROM/TO
(DR)
On the DR screen, push to select between “FROM” and
“TO.”
Home CH
Push to directly select the Home CH that is set to the
selected mode (VFO/Memory) or DR screen.
While in the CALL CH or Weather channel mode, or when
no Home CH is set, an error beep sounds.
N/A N/A
BAND/BANK
Push to select an operating band.
In the VFO mode, push to change the operating band, and
in the Memory Bank mode, push to select Bank A ~ Z, or
OFF.
L Only the entered bank is selectable.
N/A N/A
SCAN
• Push to start a scan.
• While scanning, push to stop the scan.
Temporary
Skip
Push to set the frequency to be skipped during scanning.
The selected frequencies are temporarily skipped for faster
scanning.
RX>CS
Hold down for 1 second to set the last calling station’s call
sign to “TO” (destination).
SPEECH
Push to announce the frequency, operating mode or call
sign.
L In the VFO, Memory or Call channel mode, the frequency and
the operating mode are announced.
L In the DR screen, the call sign is announced. If Simplex is
selected, the frequency is announced.
MODE Push to change the operating mode.
●
LOW Push to change the transmit power level.
DUP
Push to turn the Duplex mode ON or OFF, and the shift
direction to DUP+ or DUP–.
PRIO Push to turn the Priority watch ON or OFF.
☞ Continued on the next page
Function items (Continued)
To Next Page
Loading...
