9
MENU SCREEN
9-59
Function Description
Remote MIC Key
Up/Down MIC
Key
[F-1] [F-2] [UP] [DN]
TONE/DSQL
Push to select between tone types.
<<MODE>> FM/FM-N
TONE: Repeater Tone
TSQLS
:
Pocket Beep with Tone Squelch
TSQL: (Tone Squelch)
DTCSS: Pocket Beep with DTCS Code Squelch
DTCS: DTCS Code Squelch
TSQL-R: Reverse Tone Squelch
DTCS-R: Reverse DTCS Code Squelch
DTCS (T) (“DTCS” blinks):
TX:DTCS, RX:OFF
TONE (T)/DTCS (R) (“T-DTCS” is displayed, “T” blinks.)
:
TX:TONE, RX:DTCS
DTCS (T)/TSQL (R) (“D-TSQL” is displayed, “D” blinks.)
:
TX:DTCS, RX:CTCSS
TONE (T)/TSQL (R) (“T-TSQL” is displayed, “T” blinks.)
:
TX:TONE, RX:CTCSS
<<MODE>> DV
L You can set this setting on the DR screen.
DSQLS: Pocket Beep with Digital Call sign Squelch
DSQL: Digital Call sign Squelch
CSQLS: Pocket Beep with Digital Code Squelch
CSQL: Digital Code Squelch
MW
In the VFO mode or on the DR screen, hold down to save
the displayed frequency into a Memory blank channel.
MUTE Push to turn the Mute function ON or OFF.
Voice TX
(T1)
• Push to transmit the voice audio recorded on the microSD
card once.
• Hold down for 1 second to repeatedly transmit the voice
audio.
L This key function can also be used on the DR screen.
L If the voice audio is not saved in the [T1] (Voice memory number
for TX) on the Voice TX record screen, this function is disabled.
DTMF
DIRECT TX
Push to display the DTMF code direct entry mode screen.
N/A N/A
T-CALL Push to transmit a 1750 Hz tone.
• During TX:
●: Default setting : Available N/A: Not available
Function Description
Remote MIC Key
Up/Down MIC
Key
[F-1] [F-2] [UP] [DN]
--- No function
● ● ●
LOW Push to change the transmit power level.
Voice TX
(T1)
Push to transmit the voice audio recorded on the microSD
card once.
Hold down for 1 second to repeatedly transmit the voice audio.
- To make a repeat transmission, [PTT] must be released.
T-CALL Push to transmit a 1750 Hz tone.
●
• During RX/Standby (Continued):
●: Default setting : Available N/A: Not available
Function items
To Next Page
Loading...
