9
D-STAR OPERATION <ADVANCED>
9-34
You can move the programmed repeaters to rearrange
their display order in the selected repeater group.
The programmed repeater cannot be moved out of their
assigned repeater group.
Push [MENU] q .
Push D-pad( w ) to select the root item (“DV Memo-
ry”), and then push D-pad(Ent).
Push D-pad( e ) to select “Repeater List,” and then
push D-pad(Ent).
Push D-pad( r ) to select the repeater group that
includes the repeater you want to move, and then
push D-pad(Ent).
Push D-pad( t ) to select the repeater to be moved.
Push [QUICK] y .
Push D-pad( u ) to select “Move,” and then push D-
pad(Ent).
• “DESTINATION” blinks on the upper left of the LCD.
i Push D-pad() to select the location to insert the
repeater you want to move, which will be above the
memory name selected in this screen, and then push
D-pad(Ent).
• The selected repeater is inserted to above the destina-
tion repeater name.
• When “<<Move End>>” is selected, the selected repeater
is moved to the bottom of the repeater group.
■ Rearrange the display order of the repeater
Select the repeater
to be moved.
Blinks
Blinks
Select the
destination
“East Tokyo” is
moved to the
bottom.