16
MENU SCREEN
16-80
Band Edge Beep (Default: OFF)
Sounds > Band Edge Beep (Band Edge Beep)
Turn the Band edge beep ON or OFF.
• OFF : Band edge beep is OFF.
• ON : When you tune into or out of the AIR, VHF and UHF band’s fre-
quency range with [DIAL], a beep sounds.
Scan Stop Beep (Default: OFF)
Sounds > Scan Stop Beep (Scan Stop Beep)
Turn the scan stop beep ON or OFF.
• OFF : No beep sounds.
• ON : A beep sounds when a received signal stops the scan.
Standby Beep (Default: ON)
Sounds > Standby Beep (Standby Beep)
Turn the standby beep function ON or OFF.
This function sounds a beep after a received signal disappears.
• OFF : Turns the function OFF.
• ON : Turns the function ON to sound a beep.
• ON (to me: High Tone) : Turns the function ON to sound a beep. If the sig-
nal is addressed to your call sign, a high beep
sounds.
• The standby beep sounds even when “OFF” is selected in Key-touch
beep.
• The standby beep output level follows the Beep level setting.
Sounds items (Continued) ■
To Next Page
Loading...
