6
BC RADIO OPERATION
6-8
Basic operation (Continued) ■
D Setting a tuning step (AM Only)
If you select the BC Radio frequency by rotating [DIAL]
in the Tuning mode, the frequency changes in the se-
lected tuning step.
Push [MODE] q to select the AM mode.
Push [QUICK] w .
Push D-pad( e ) to select “TS,” and then push D-
pad(Ent).
Push D-pad( r ) to select the desired tuning step be-
tween 1.0 kHz, 9.0 kHz and 10.0 kHz.
Push D-pad(Ent) to save, and exit the Quick Menu t
screen.
When 10.0 kHz
step is selected.
The frequency changes in the
selected tuning step.
To Next Page
Loading...
