Icom ID-51A Advanced Instructions

16
MENU SCREEN
16-50
■ RX History items
RX History
RX History (RX HISTORY)
When a call is received in the DV mode, the call information such as the
caller station call sign, used repeater call sign, and so on, are stored in this
screen.
Up to 50 records can be stored.
• Even if the transceiver power is turned OFF, the stored records are not
deleted.
You can confirm the RX record contents with D-pad(Ent).
RX History number
(01 to 50)
Message included in
the received call
Received date
Caller station (upper)
Called station (lower)
Repeater call sign
When you receive a
simplex call, this item
shows the frequency.
Appears when the Gate-
way call is received.
Appears when the po-
sition data is included.
“(UP)” appears when the
uplink signal is received.
Contents of the RX history Top screen
RX01–RX50 RX history number
CALLER*
Shows the call sign of the caller station and any note pro-
grammed after the call sign.
CALLED* Shows the call sign of the called station.
MESSAGE
Shows any message included in the received call, if pro-
grammed.
RXRPT2*
Shows the call sign of the repeater you received the call
from.
FREQUENCY Shows the simplex frequency.
RX TIME Shows the date and time the call was received.
GW
Appears when a Gateway call is received.
GPS
Appears when position data is included.
(UP) Appears when an uplink signal is received.
* These items can be switched to the Name display.
Previous view

Icom ID-51A Specifications

General

Frequency Range	144-148 MHz, 430-450 MHz
Antenna Connector	SMA
GPS Receiver	Yes
Waterproof	IPX7
Modes	FM, DV
Weight	255 g
Memory Channels	1304 channels
Output Power	5W (High), 2.5W (Middle), 0.5W (Low)