17
OTHER FUNCTIONS
17-8
■ Using the DTMF memory
The transceiver can stores up to 16 channels of DTMF
memory with 24-digit DTMF code.
D DTMF code programming
Push [MENU] q to select the MENU list screen.
Push D-pad( w ) to select the root item (“DTMF/T-
CALL”), and then push D-pad(Ent).
Push D-pad( e ) to select “DTMF Memory,” and then
push D-pad(Ent).
• DTMF memory channel list (d0 to d#) is displayed.
Push D-pad( r ) to select the desired DTMF memory
channel, then push [QUICK] .
Push D-pad( t ) to select “Edit,” and then push D-
pad(Ent) to enter DTMF memory edit mode.
Rotate [DIAL] to select the desired code, the push y
D-pad(Ent) to set the code.
Repeat the above step to enter the desired DTMF
codes.
• Push D-pad() to move the cursor backward or forward.
When the cursor is on the 24th digit, the cursor can be
moved to backward.
• Push [CLR]
to delete the selected character, or hold
down [CLR]
to continuously delete the characters,
first to the right, and then to the left of the cursor.
When all digits are set, push D-pad(Ent). u
• The entered DTMF codes are stored into the DTMF mem-
ory channel, and automatically return to DTMF memory
screen.
i
Push [MENU] to exit the DTMF memory edit
mode.
Example: Stores the DTMF code, “012345” into the
DTMF memory channel “d0.”
Stored DTMF code
Information ✓
You can clear the prorammed DTMF code.
Push D-pad( ➥ ) to select “Clear” in the step r as
described above, and then push D-pad(Ent)
DTMF memory edit mode
Cursor
To Next Page
Loading...
