10
GPS/GPS-A OPERATION
10-5
With this function, you can save the position informa-
tion of your station from wherever you are, and also the
position information of the station you received it from.
The GPS Memory is capable of storing 200 channels
in total, assignable to one of 27 groups, A to Z and
“(No Group)”.
Push [QUICK] q .
Push D-pad( w ) to select “GPS Position,” and then
push D-pad(Ent).
Push D-pad( e ) to select the position screen that you
want to save the contents.
• To save your position, select the MY position screen.
• To save the RX station’s position, select the R1 position
screen.
Push [QUICK] r .
Push D-pad( t ) to select “Add To GPS Memory,” and
push D-pad(Ent).
• The GPS MEMORY EDIT screen is displayed.
• The position information (Latitude/Longitude) is automat-
ically added.
• See pages 10-7 to 10-10 for details on editing position
data.
Push D-pad( y ) to select “<<Add Write>>,” then push
D-pad(Ent).
• The conrmation screen “Add Write?” appears.
Push D-pad( u ) to select “Yes,” and then push D-
pad(Ent).
• The added GPS Memory Channel is saved as [00], and
the previously saved channel numbers are moved up.
• The channel is added to GPS Memory and returns to the
GPS POSITION screen.
Push [CLR] i to exit the GPS POSITION screen.
Your position is saved
into “(No Group)” in
the GPS Memory.
Select the MY posi-
tion screen to save
your position.
MY Position
Checking GPS Position (Continued) ■
D Saving your own or received position data
GPS MEMORY EDIT
screen is displayed,
and Latitude/Longitude
is added.
MY Position
Select the destination
group to be saved.
To Next Page
Loading...
Need help?
General
