18
OPTIONS
18-5
■ VOX function
The transceiver has a VOX function, which allows
hands-free operation.
An optional HS-94, HS-95 or HS-97 headset and the
OPC-2006LS plug adapter cable are also required.
• The VOX (voice operated transmission) function starts trans-
mission when you speak into the microphone, without need-
ing to push [PTT]. It then automatically returns to reception
when you stop speaking.
NOTE: Set the external microphone gain before set-
ting the VOX gain in the MENU screen. We recom-
mend you set the microphone gain level to 3.
(MENU > Function > MIC Gain (External))
Optional unit connection D
Turn OFF the transceiver. q
Lift up the jack cover. w
Connect the HS-94, HS-95 or HS-97 and the OPC- e
2006LS, as illustrated to the right.
D Selecting the headset type
Before using the VOX function, select the headset
type.
Turn ON the transceiver. q
Push [MENU] w .
Push D-pad( e ) to select the root item (“Function”),
and then push D-pad(Ent) to go to the next screen.
(MENU > Function > VOX > Headset Select)
Refer to the menu sequence shown directly above r
and push D-pad() to select, and then D-pad(Ent)
to enter, one or more times until the last screen is
displayed.
t Push D-pad() to select the option.
HS-95 : Select when using the HS-95.
Other : Select when using the HS-94 or HS-97.
Push [MENU] y to exit the MENU screen.
OPC-2006LS
HS-94
Transceiver
Be sure to turn OFF power when plugging in or un-
plugging the OPC-2006LS into or from the [MIC/SP]
jack.
To Next Page
Loading...
Need help?
General
