9
D-ST
AR OPERA
TION <AD
V
ANCED>
9-35
This section describes how to add a new repeater infor-
mation to the repeater list using the RX history.
Push [MENU] q .
Push D-pad( w ) to select the root item (“RX History”),
and then push D-pad(Ent).
Push D-pad( e ) to select the RX history number that
includes the repeater you want to add to the repeater
list.
Push D-pad(Ent). r
• The RX history detail screen is displayed.
t
Push D-pad() to display “RXRPT1” and “RXRPT2.”
Push [QUICK] y .
Push D-pad( u ) to select “Add To RPT List,” and then
push D-pad(Ent).
Push D-pad( i ) to select the repeater call sign you
want to add to the repeater list, and then push D-
pad(Ent).
• When only one call sign is displayed, directly push D-
pad(Ent).
• The display is switched from the RX HISTORY screen
to the REPEATER LIST EDIT screen of the MENU. The
selected repeater call sign is automatically programmed.
• If necessary, edit the contents. (pp. 9-22 to 9-31)
o Push D-pad() to select “<<Add To RPT List>>,” and
then push D-pad(Ent).
!0 Push D-pad() to select “YES,” and then push D-
pad(Ent).
• The programmed contents are added to the repeater list,
and the display returns to the RX HISTORY screen.
■ Adding the Repeater information using the RX History
How to switch the name display:
When the call sign is displayed on the RX HISTORY
screen, you can switch the display type to “Name Dis-
play.”
When the repeater name is not programmed in the
repeater list, the display does not switch to the name
display. It is convenient that you find a repeater that is
not included in the repeater list.
When the RX HISTORY ➥
screen is displayed,
push [QUICK] to
display the Quick menu.
Push D-pad() to select
“Name Display,” and then
push D-pad(Ent).
Example:
“JP1YJJ A” is
added.
RX history number
“RXRPT1” and
“RXRPT2” are
displayed.
To Next Page
Loading...
Need help?
General
