10
GPS/GPS-A OPERATION
10-13
You can move programmed GPS memories to rear-
range their display order in the selected GPS memory
group.
The programmed GPS memory cannot be moved out
of their assigned memory group.
Push [MENU] q .
Push D-pad( w ) to select the root item (“GPS”), and
then push D-pad(Ent).
Push D-pad( e ) to select “GPS Memory,” and then
push D-pad(Ent).
Push D-pad( r ) to select the GPS memory group
that has the GPS memory you want to move, and
then push D-pad(Ent).
Push D-pad( t ) to select the GPS memory to be
moved.
Push [QUICK] y .
Push D-pad( u ) to select “Move,” and then push D-
pad(Ent).
• “DESTINATION” blinks on the upper left of the LCD.
i Push D-pad() to select the location to insert the
memory you want to move, which will be above the
memory name selected in this screen, and then push
D-pad(Ent).
• The selected memory contents are inserted to above the
destination memory name.
• When “<<Move End>>” is selected, the selected memory
contents are moved to the bottom of the GPS memory
group.
“Tokyo Big Sight”
is moved to the
bottom.
Select the memory
to be moved.
Blinks
Select the
destination
GPS memory operation (Continued) ■
D Rearrange the display order of the GPS memory
To Next Page
Loading...
Need help?
General
