EasyManuals Logo

Icom ID-51A Advanced Instructions

Icom ID-51A
369 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
2
USING A microSD CARD
2-2
About the microSD card
The microSD and microSDHC cards are not available
from Icom. Purchase locally.
A microSD card of up to 2 GB or a microSDHC of up to
32 GB, can be used with the ID-51A/E.
Icom has checked the operation with the following mi-
croSD and microSDHC cards.
(As of November 2012)
Brand Type Memory size
SanDisk
®
microSD 2 GB
microSDHC
4 GB
8 GB
16 GB
32 GB
The above list does not guarantee the card’s perfor-
mance.
Through the rest of this document, the microSD card
and a microSDHC card are simply called microSD
cards.
Icom recommends that you format all microSD cards
to be used with the ID-51A/E, even preformatted mi-
croSD cards for PCs or other uses.
NOTE:
Read the instructions of the microSD card thorough-
ly before use.
NEVER remove the microSD card, detach the bat-
tery pack/case, or power OFF the transceiver, while
reading or writing data to or from the microSD card,
or during cloning. It will cause the data to be cor-
rupted or damage the card.
NEVER drop, or apply vibration or impact to the mi-
croSD card. This will cause the data to be corrupted
or damage the card.
The microSD card will get warm if used continuously
for a long period of time.
A microSD card has a certain lifetime, so data read-
ing or writing will not be possible when using it over
a long time period.
Icom will not be responsible for any damage caused
by data corruption of a microSD card.
Saving data onto the microSD
card
The following data can be stored onto the card:
Data settings of the transceiver
Memory channel contents, and repeater lists stored in
the transceiver.
Communication contents
The transmitted and received audio.
Communication log
The communication and receive history log.
Automatic answering voice audio for the DV mode
Voice audio to use with the Auto Reply function in the
DV Mode.
V
oice audio for the Voice TX function
Voice audio to use with the Voice TX function.
Position data from the GPS receiver
Position and time data from a GPS receiver, that is in a
log file as a route.
Voice Recorder
The microphone audio.
Previous view

Table of Contents

Other manuals for Icom ID-51A

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Icom ID-51A and is the answer not in the manual?

Icom ID-51A Specifications

General IconGeneral
Frequency Range144-148 MHz, 430-450 MHz
Antenna ConnectorSMA
GPS ReceiverYes
WaterproofIPX7
ModesFM, DV
Weight255 g
Memory Channels1304 channels
Output Power5W (High), 2.5W (Middle), 0.5W (Low)

Related product manuals