16
MENU SCREEN
16-59
■ SPEECH items
RX Call Sign SPEECH (Default: ON (Kerchunk))
SPEECH > RX Call Sign SPEECH (RX Call Sign SPEECH)
Turn the RX call sign speech function ON or OFF for calls received in the DV
mode.
• OFF : No announcement is made even when a call is received.
• ON (Kerchunk) : The caller station’s call sign is announced only when it
makes a short transmission.
• ON (All) : The caller station’s call sign is always announced.
NOTE: When a call is received during an announcement, the received
audio is heard after cancelling the announcement.
RX>CS SPEECH (Default: ON)
SPEECH > RX>CS SPEECH (RX>CS SPEECH)
Turn the RX>CS Speech function ON or OFF.
The RX>CS Speech function enables the transceiver to announce the sta-
tion call sign that is selected from a Received Call Record by pushing
and then rotating [DIAL]. (p. 9-16)
• OFF : The station call sign is not announced.
• ON : The station call sign is announced.
NOTE:
• When a call is received during an announcement, the received audio will
be muted, and no audio is recorded onto the microSD card.
• If the call sign is announced while recording, the recorded contents are
silent during the announcement.
DIAL SPEECH (Default: OFF)
SPEECH > DIAL SPEECH (DIAL SPEECH)
Turn the Dial Speech function ON or OFF.
The Dial Speech function enables the transceiver to announce the frequency
or repeater call sign that is selected by rotating [DIAL].
• OFF : The Dial Speech function is OFF.
• ON : The frequency or repeater call sign is announced, 1 second after
[DIAL] selection.
- In the VFO, Memory and Call channel modes, the frequency is
announced.
- In the DR mode, the repeater call sign is announced. If Simplex
is selected, the frequency is announced.
NOTE: When a call is received during an announcement, the received
audio is heard after cancelling the announcement.
To Next Page
Loading...
Need help?
General
