12
MEMORY CHANNEL PROGRAMMING
12-9
■ Memory bank selection
Push [M/CALL] q one or more times to select the
Memory mode.
Push [QUICK] w to open the Quick Menu screen.
Push D-pad( e ) to select “Bank Select,” and then
push D-pad(Ent).
Rotate [DIAL] to select a desired bank group, “A” to r
“Z.”
• Only Bank groups that have memory channels assigned
to them are displayed.
Push D-pad(Ent) to set. t
Rotate [DIAL] to select a desired bank channel. y
• Only assigned bank channels are displayed.
• To return to the Memory channels display, repeat steps
w to e, and select “OFF” in step r.
[DIAL]
Push [M/CALL] one
or more times to select
the Memory mode.
Push [QUICK]
, then
push D-pad() to select
“Bank Select.”
Rotate [DIAL] to select the
bank group “A.”
Push D-pad(Ent) to set.
Rotate [DIAL] to select a
desired bank channel.
Example: Selecting the bank group “A.”
To Next Page
Loading...
