Icom ID-51A

12-1
Section 12
MEMORY CHANNEL PROGRAMMING
General description ■ ........................................... 12-2
Memory channel contents D ............................. 12-2
Memory channel selection ■ ................................. 12-3
Selecting a call channel ■ ..................................... 12-3
Memory channel programming ■ .......................... 12-4
Copying memory and Call channel contents ■ ..... 12-5
Memory or Call channel D VFO...................... 12-5
Memory or Call channel D Another memory or
Call channel ................................................... 12-6
Memory bank setting ■ ......................................... 12-7
Assigning a memory channel to a D
memory bank ................................................ 12-7
Directly programming into a memory bank D .... 12-8
Memory bank selection ■ ..................................... 12-9
Programming memory/bank/scan name ■ ......... 12-10
Programming memory name, bank name or D
scan name ................................................... 12-10
Selecting a memory name display ■ .................. 12-12
Memory clearing ■ .............................................. 12-13
Previous view