16
MENU SCREEN
16-48
■ Call sign items
Call Sign
Call Sign (CALL SIGN)
Sets or displays the “UR,” “R1,” “R2” and “MY” call signs to be used for DV
operation.
Except for the DR mode, sets the desired call signs to be used for DV opera-
tion in this screen.
For Simplex operation (DV mode)
“UR” (p. 16-49) and “MY” call signs can be set.
For Duplex (repeater) operation (DV/DR mode)
While in the DR mode, the only “MY” call sign can be set.
<To set Duplex (repeater) operation>
Example : While in the DV mode, Making a Gateway call
Making a gateway CQ call to Hamacho repeater (JP1YIU B) from
the Hirano repeater (JP3YHH B)*, while in the DV mode.
* Before starting to set the call sign, set the frequency of your access repeater or du-
plex direction. (See pages 5-6 and 15-5.)
NOTE:When the Digital Repeater Setting function is ON, the repeater call
sign can be automatically set. (p. 16-57)
1.Callsign(“R1”)setting
While in the DV mode, push D-pad( q ) to select “R1,” and then push
[QUICK] .
Push D-pad( w ) to select “Edit,” and then push D-pad(Ent).
Rotate [DIAL] to select the first character. e
• Alphanumeric characters and symbol (“/”) can be entered.
Push r to move the cursor backward, or push to move the cursor
forward.
Repeat steps t e and r to enter a name of up to 8 characters, including
a spaces.
After entering, push D-pad(Ent) to set. y
(Continued on the next page.)
To Next Page
Loading...
Need help?
General
