Icom ID-51A Advanced Instructions

16
MENU SCREEN
16-73
Display items (Continued) ■
Busy LED (Default: ON)
Display > Busy LED (Busy LED)
The TX/RX indicator lights green while receiving a signal, or the squelch is
open. It can be turned OFF to conserve battery power, if desired.
• OFF : The indicator does not light, even if a signal is received.
• ON : The indicator lights green while receiving a signal, or the squelch is
open.
NOTE: The indicator lights red while transmitting, regardless of the setting.
RX Call Sign (Default: Auto)
Display > RX Call Sign (RX Call Sign)
When a call is received, select whether or not to display the call sign of the
caller station.
• OFF : Turns the function OFF.
• Auto : The caller station’s call sign automatically scrolls once,
and then disappears.
• Auto (RX Hold) : The caller station’s call sign automatically scrolls once,
and then remains on the LCD until the signal disappears.
(Example : When receiving a call from “JM1ZLK”)
NOTE: When “Auto” or “Auto (RX Hold)” is selected, and if the call sign and
name of the caller station is programmed in Your Call Sign screen, the
programmed name is displayed after showing the call sign.
Previous view

Icom ID-51A Specifications

General

Frequency Range	144-148 MHz, 430-450 MHz
Antenna Connector	SMA
GPS Receiver	Yes
Waterproof	IPX7
Modes	FM, DV
Weight	255 g
Memory Channels	1304 channels
Output Power	5W (High), 2.5W (Middle), 0.5W (Low)