10
GPS/GPS-A OPERATION
10-22
Comment programming8.
Program your comment and transmit it with the GPS-A
position data.
The number of characters you can enter differs, de-
pending on the settings of data extension
(p. 10-19) and
altitude (p. 10-20).
Data Extension
Altitude
The number of characters
OFF OFF
less than 43 (Default)
OFF ON
less than 35
Course/Speed
OFF
less than 36
Course/Speed
ON
less than 28
!7 Push D-pad() and D-pad(Ent) to select “Com-
ment.”
!8 Push [QUICK] .
!9 Push D-pad() to select “Edit,” then push D-pad(Ent),
and then the comment editing screen appears.
@0 Rotate [DIAL] to select the first character.
• Selectable input characters are Upper case letters, Low-
er case letters, Numbers or Symbols.
• The selected character blinks.
• Push D-pad() to move the cursor backward or forward.
• While selecting a character, push [QUICK]
to change
the character to an upper case or lower case letter.
• While selecting a digit, push [QUICK]
to open the
input mode selection window.
• A space can be entered in any input mode selected.
• Rotate [DIAL] counter clockwise to enter a space.
• Push [CLR]
to delete the selected character, or hold
down [CLR]
to continuously delete the characters,
first to the right, and then to the left of the cursor.
• See page 2-7 for programming details.
• A character after
“
” would not be transmitted.
@1 After entering the comment, push D-pad(Ent).
@2 Push [MENU] to exit the Menu screen.
Transmitting GPS-A data (Continued) ■
Ending icon (Up to 28 characters
can be input)
To Next Page
Loading...
