Icom ID-51A Advanced Instructions

14
PRIORITY WATCH
14-12
VFO scan and Memory/Bank scan (Continued) ■
When a signal is received.5.
• When “ON” is selected.
When a signal is received on the priority channel,
the channel is automatically selected.
The “PRIO” icon blinks.
* The scan pause timer and resume settings are the
same as for a normal scan.
• When “BELL” is selected.
When a signal is received on the priority channel, a
beep sounds and the “
” icon blinks.
The VFO scan resumes.
Automatically selects the Memory channel.
Remains the VFO mode.
Example: In case of the Memory scan
Blinks
Blinks
Blinks
Blinks
Previous view

Icom ID-51A Specifications

General

Frequency Range	144-148 MHz, 430-450 MHz
Antenna Connector	SMA
GPS Receiver	Yes
Waterproof	IPX7
Modes	FM, DV
Weight	255 g
Memory Channels	1304 channels
Output Power	5W (High), 2.5W (Middle), 0.5W (Low)