Icom ID-51A Advanced Instructions

14
PRIORITY WATCH
14-18
When a signal is received.5.
• When “ON” is selected.
When a signal is received on the priority channel, the
channel is automatically selected. The “PRIO” icon
blinks.
Push [CLR]
to resume the priority scan. Push it
again to cancel the scan.
* The scan pause timer and resume settings are the
same as for a normal scan.
• When “Bell” is selected.
When a signal is received on the priority channel,
a beep sounds and the “PRIO” icon blinks. The DR
mode scan resumes.
DR mode scan and a priority channel (Continued) ■
Automatically selects the priority channel.
Remains the DR mode.
Example: In case of the Memory channel
Blinks
Blinks
Previous view

Icom ID-51A Specifications

General

Frequency Range	144-148 MHz, 430-450 MHz
Antenna Connector	SMA
GPS Receiver	Yes
Waterproof	IPX7
Modes	FM, DV
Weight	255 g
Memory Channels	1304 channels
Output Power	5W (High), 2.5W (Middle), 0.5W (Low)