EasyManuals Logo

Icom ID-51A Advanced Instructions

Icom ID-51A
369 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #291 background imageLoading...
Page #291 background image
16
MENU SCREEN
16-56
DV Set items (Continued)
Auto Reply (Default: OFF)
DV Set > Auto Reply (Auto Reply)
Set the automatic reply function to ON, OFF, Voice or Position.
This function automatically replies to a call addressed to your own call sign,
even if you are away from the transceiver.
When “ON” or “Voice” is selected, the automatic reply function is automati-
cally turned OFF when you push [PTT].
When “Position” is selected, the automatic reply function is kept to ON, even
if you push [PTT].
• OFF : Turns the function OFF.
• ON : Replies with your own call sign. (No audio reply is sent)
Voice : Replies with your call sign and any Auto Reply message recorded
on the microSD (up to 10 seconds).
If no microSD card is inserted or no message is recorded, only
your call sign is transmitted. The transmitted audio can be moni-
tored.
• Position : Replies with your own call sign and transmits your position using
the internal GPS receiver.
It may take a few seconds to receive your position, and may be
late to send the call.
- When “OFF” or “Manual” is set in “GPS Select, the internal GPS re-
ceiver is temporarily turned ON.
- When “External GPS” is set in “GPS Select, the transceiver transmits
your position. But if the external GPS receiver is not connected, the
internal GPS receiver will be activated.
NOTE:
The Power Save function is disabled when “ON” or “Voice” is selected.
The Power Save function is enabled when “Position” is selected.
DV Data TX (Default: Auto)
DV Set > DV Data TX (DV Data TX)
Select whether to manually or automatically transmit slow-speed data.
• PTT : Push [PTT] to manually transmit the input data.
• Auto : When data is input from a PC through the [DATA] jack, the trans-
ceiver automatically transmits it.
Digital Monitor (Default: Auto)
DV Set > Digital Monitor (Digital Monitor)
Select the receive mode when [SQL] is held down in the DV operation mode.
• Auto : Receives in the DV mode or the FM mode, depending on the re-
ceived signal.
• Digital : Monitors in the DV mode.
• Analog : Monitors in the FM mode.
Previous view

Table of Contents

Other manuals for Icom ID-51A

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Icom ID-51A and is the answer not in the manual?

Icom ID-51A Specifications

General IconGeneral
Frequency Range144-148 MHz, 430-450 MHz
Antenna ConnectorSMA
GPS ReceiverYes
WaterproofIPX7
ModesFM, DV
Weight255 g
Memory Channels1304 channels
Output Power5W (High), 2.5W (Middle), 0.5W (Low)

Related product manuals