Icom ID-51A Advanced Instructions

17
OTHER FUNCTIONS
17-12
Using the DTMF memory (Continued) ■
D Setting DTMF transfer speed
The DTMF transfer speed can be selected.
Push [MENU] q to select the MENU list screen.
Push D-pad( w ) to select the root item (“DTMF/T-
CALL”), and then push D-pad(Ent).
D-pad
(�)
(Ent)
Push D-pad( e ) to select “DTMF Speed,” and then
push D-pad(Ent).
Push D-pad( r ) to select a desired transfer speed,
then push D-pad(Ent)
• 100ms : Transfer the DTMF tones at about 100 millisec-
onds per code.
5 characters per second.
• 200ms : Transfer the DTMF tones at about 200 millisec-
onds per code.
2.5 characters per second.
• 300ms : Transfer the DTMF tones at about 300 millisec-
onds per code.
1.6 characters per second.
• 500ms : Transfer the DTMF tones at about 500 millisec-
onds per code.
1 character per second.
Push [MENU] t to exit the MENU screen.
Example: Set the DTMF transfer speed to 300 milli-
seconds.
Pi, Po, Pa
Pi-, Po-, Pa-
When “100ms” is se-
lected, the DTMF trans-
fer speed is fast.
When “500ms” is se-
lected, the DTMF trans-
fer speed is slow.
Previous view

Icom ID-51A Specifications

General

Frequency Range	144-148 MHz, 430-450 MHz
Antenna Connector	SMA
GPS Receiver	Yes
Waterproof	IPX7
Modes	FM, DV
Weight	255 g
Memory Channels	1304 channels
Output Power	5W (High), 2.5W (Middle), 0.5W (Low)