Icom ID-51A

17
OTHER FUNCTIONS
17-14
Tone squelch operation ■
Tone squelch frequency setting and operation (Continued) D
Push [MENU] i to exit the MENU screen.
Push [QUICK] o .
!0 Push D-pad() to select “TONE,” and then push D-
pad(Ent).
D-pad
(�)
(Ent)
!1 Push D-pad() to select either “TSQLS" or
“TSQL.”
• TSQL
S : The tone squelch with pocket beep
function ON.
• TSQL : The tone squelch function ON.
• When stands by the reversed tone squelch function, se-
lect “TSQL-R.”
!2 Push D-pad(Ent) to set the tone squelch function,
and then close the QUICK Menu screen.
!3 Holding down [PTT] and call a desired station.
Operate as the normal way.
Foryourinformation:Soundsbeepwhenacallis
received.
If “TSQLS” is selected in step !1, beeps sound
for 30 seconds and the icon “S” blinks when a call
with the matched tone signal is received.
After receiving a call, hold down [PTT] within ➥
30 seconds then start conversation, or push D-
pad(Ent) to cancel the pocket beep function (“S”
icon disappears).After that, the transceiver selects
regular tone squelch operation.
• When receiving a call with “TSQLS”
Continued from step u on the previous page.
Appears.
• When reversed tone
squelch is selected
in step !
1, “TSQL-R”
icon appears.
Beep, Beep, Beep...
Previous view