17
OTHER FUNCTIONS
17-18
• Removing the microSD card
Cloning function ■
Transceiver-to-Transceiver cloning using a microSD D
card (Continued)
Push D-pad(Ent) to set the file name. y
The conrmation screen “Save le?” appears.
Push D-pad( u ) to select “YES,” and then push D-
pad(Ent) to save.
• While saving, a progress bar is displayed, then the “SD
CARD” screen is displayed after the save is completed.
Push [MENU] i to exit the MENU screen.
Remove the microSD card from the master trans-2.
ceiver, and then attach it to the sub transceiver.
Hold down the master transceiver’s [ o
] to turn OFF
the power.
!0 Remove the microSD card from the master trans-
ceiver as shown at right.
!1 Attach the removed microSD card to the sub trans-
ceiver, then hold down the sub transceiver’s [ ] to
turn ON the power.
NEVER forcibly or inversely insert the card.
It will damage the card and/or the slot.
Slot cover Slot cover
Push the microSD card
until a click sounds.
Pull the microSD
card out.
To Next Page
Loading...
