8
D-STAR OPERATION <BASIC>
8-13
The TX History stores the name and/or call sign of up
to 20 “TO” (Destination) settings which were used when
you made the calls.
NOTE: If you never transmit a call in the DV mode,
you cannot select “TO” (destination) from the TX His-
tory.
Hold down q for 1 second.
• The DR mode is selected.
Push D-pad( w ) to select “TO,” and then push D-
pad(Ent).
Push D-pad( e ) to select “TX History,” and then push
D-pad(Ent).
Push D-pad( r ) to select the destination, and then
push D-pad(Ent).
• Example: “Dallas”
• “Dallas” is displayed on “TO.”
“TO” (Destination) setting (Continued) ■
D Using the TX History
Example: Select the “Melbourne” repeater in the TX
History.
Completed
“Dallas”
repeater’s
call sign is
displayed.
The Sub name is dis-
played when a repeat-
er is selected.
You can add the TX HISTORY data to memory, or
delete it from there.
Push [QUICK] ➥ on the TX HISTORY screen,
then push D-pad() to select the desired item,
and then push D-pad(Ent).
To Next Page
Loading...
Need help?
General
