IDEC FL1E-H12RCE User Manual

Programming IDEC SmartRelay
98 IDEC SmartRelay Manual
To enable/disable automatic S/W Time conversion in
parameter assignment mode:
If you want to enable/disable automatic S/W Time
conversion
in parameter assignment mode, select in the
parameter assignment menu ’Set..’, then menus ’Clock’ and
’S/W Time’. You can now enable/disable automatic S/W
Time conversion.
Enabling summertime/wintertime conversion
You now want to enable this conversion and define or set its
p
aramete
rs:
1. Move the ’>’ cursor to ’On’: Press
or
2. Confirm ’On’: Press OK
The display shows:
EU
3. Select the desired conversion: Press or
What is shown on the display ?:
•’EU’ represents the start and end of European
summertime.
•’UK
’ represents the start and end of summertime in the
United Kingdo
m.
•’US1’ represents the start and end of daylight saving time
(su
mmertime) in the United States prior to 2007.
•’US2’ represents the start and end of daylight saving time
(su
mmertime) in the United States in 2007 and later
years.
•’AUS’
represents the start and end of Australian
summertime.
•’AUS-TAS’ rep
res
ents the start and end of Australian/
Tasmanian summertime.
•’NZ’ represents the start and end of New Zealand
summertime.
• . . :
Here you can enter any month, day and time zone
differ
ence.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com

IDEC FL1E-H12RCE Specifications

General

Brand	IDEC
Model	FL1E-H12RCE
Category	Other
Language	English