Inateck P6 - Inventory Mode

18
1.2.2. Inventory Mode
If you want to keep the barcodes in the bu󱐯er of Inateck P6 for multiple uploading, you
can choose inventory mode. In inventory mode, Inateck P6 will count the number of the
barcodes automatically. Users may use inventory mode to keep scanned barcodes in the
bu󱐯er of Inateck P6, and upload them to computer in batches. Under inventory mode,
users are not restricted to the time and location when upload data. Of course, history data
can be cleared in bu󱐯er after uploading. More details about inventory mode are as below.
Note:
1. The below ve functions can be realized without extra scanning of “Enter Setup” or
"Exit with Save" barcodes.
2. The below ve functions can be used under any scanning mode mentioned in 1.5.
1) Scan the ‘Enter Inventory Mode’ barcode to enter Inventory Mode
Enter Inventory Mode
Data Upload (for Inventory Mode only)
Upload the Number of scanned barcodes (for Inventory Mode only)
Clear Data in Bu󱐯er (for Inventory Mode only)
(*) Return to Common Mode
2) Scan the ‘Data Upload (for Inventory Mode only)’barcode to upload data from bu󱐯er (for
Inventory Mode only)
3) Scan the barcode to upload the number of scanned barcodes (for Inventory Mode
only)
4) Scan the barcode to clear data in bu󱐯er (for Inventory Mode only).
5) Scan the barcode to return to Common Mode